Loading ...
Loading ...
Loading ...
8 INSTALLATION
INSTALLATION
Before Installing
Installation Overview
Please read the following installation instructions
first after purchasing this product or transporting
it to another location.
a Unpacking the Freezer
b Choosing the Proper Location
c Reversing Doors and Leveling
Unpacking the Freezer
WARNING
• Use two or more people to move and install the
appliance. Failure to do so can result in back
injury or other injury.
• The appliance is heavy. Protect the floor when
moving the appliance for cleaning or service.
Always pull the appliance straight out when
moving it. Do not wiggle or walk the appliance
when trying to move it, as floor damage could
occur.
• Keep flammable materials and vapors, such as
gasoline, away from the appliance. Failure to do
so can result in fire, explosion, or death.
NOTE
• Remove tape and any temporary labels from
your appliance before using. Do not remove any
warning labels, the model and serial number
label, or the Tech Sheet that is located under the
front of the appliance.
• To remove any remaining tape or glue, rub the
area briskly with your thumb. Tape or glue
residue can also be easily removed by rubbing a
small amount of liquid dish soap over the
adhesive with your fingers. Wipe with warm
water and dry.
• Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of your appliance.
• Reinstall or adjust shelves as needed. Freezer
shelves are installed in the shipping position.
Reinstall shelves according to your individual
storage needs.
Choosing the Proper
Location
Electricity
Use an individual, grounded outlet:115 Volts, 60
Hz, AC, 15 amps minimum.
WARNING
• Do not overload house wiring and cause a fire
hazard by plugging in multiple appliances in the
same outlet with the appliance.
• To reduce the risk of electric shock, do not install
the appliance in a wet or damp area.
Flooring
To avoid noise and vibration, the unit must be
installed and leveled on a solidly constructed floor.
If required, adjust the leveling legs to compensate
for the unevenness of the floor.
NOTE
• Installing on carpeting, soft tile surfaces, a
platform or weakly supported structure is not
recommended.
Loading ...
Loading ...
Loading ...