Loading ...
Loading ...
Loading ...
11OPERATION
ENGLISH
OPERATION
Before Use
Checklist
Clean the appliance.
Clean the appliance thoroughly and wipe off all dust that accumulated during
shipping.
CAUTION
• Do not scratch the appliance with a sharp object or use a detergent that
contains alcohol, a flammable liquid or an abrasive when removing any
tape or adhesive from the appliance. Remove adhesive residue by wiping it
off with your thumb or dish detergent.
• Do not peel off the model or serial number label or the technical
information on the rear surface of the appliance.
Open doors and drawers to ventilate the interior.
The inside of the appliance may smell like plastic at first. Remove any
adhesive tape from inside the appliance and open the door and the drawers
for ventilation.
Connect the power supply.
Check if the power supply is connected before use.
Wait for the freezer to cool.
Allow the appliance to run for at least two to three hours before putting food
in it. Check the flow of cold air in the freezer compartment to ensure proper
cooling.
CAUTION
• Putting food in the freezer before it has cooled could cause the food to
spoil, or a bad odor to remain inside the freezer.
The appliance makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature decreases.
Loading ...
Loading ...
Loading ...