Loading ...
Loading ...
Loading ...
Setting the C ock
Setting the C_ock
The _ pad is used to set the clock. The clock may be set for 12 or 24 hour time of day
operation. The clock has been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has been interrupted, the
timer in the display wiJJflash with "PF" (power failure, See Figure 1).
When PF appears in the display, press CL-EE_R• No sound wilJ be heard, but after 10 seconds a
beep wilJ sounds and PF wilJ disappear.
iNSTRUCTiONS PRESS
To set the dock (example be_ow for 1:30):
1. Press _. "CLO" wiJJappear in the display (Figure 2).
2. Press _ _ @ pads to set the time of day to 1:30
(Figure 3). "CLO" wiJJappear in the display. Press (_.
"CLO" wilJ disappear and the clock wilJ start (Figure 4).
G
CbQdZ>
Changing between 12 or 24 hour time of day display:
1. Press and hold _,LOCK_for 6 seconds (Figure 3). While holding
the pad down the current time of day wiJJremain and "CLO" wiJJ
disappear from the display (Figure 4). CONTINUE holding the
pad until a beep is heard.
_for 6 seconds
2. The display will show either "12Hr" (Figure 5) or "24Hr" (Figure
6).
3. Press _,_LFA_)to switch between the 12 and 24 hour time of day
display. The display will show either "12Hr" (Figure 5) or "24Hr"
(Figure 6).
STO P
4. Press to accept the change or press _CL--'_"rto reject the
change.
Or CL---_R
5. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.
Figure 1
DISPLAY
16
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Loading ...
Loading ...
Loading ...