CCR06BM2PS5 Owner's Manual and Installation Instructions

Loading ...

49-1000491 Rev. 4 13

Installation Instructions

INSTALLING THE BEVERAGE CENTER (Cont.)

REVERSING THE DOOR SWING - MODELS WITH POCKET HANDLE - CCR06BM**** (Cont.)

2. Peel back the gasket and remove it from the door.

3. Use a flat screwdriver to remove the plastic covers

near the top and bottom hinge.

4. Loosen the screws that hold the top and bottom

hinges to cabinet.

5. Remove the door and close the hinges.

6. Remove the hinge screws

and install them on the other

side. Install screws only part

of the way so that hinges

can slide behind the screw

heads.

7. Remove trim screws and install in opposite corners.

8. Remove the hinges by fully loosening (2) screws.

9. Use a flat screw driver to remove the top and

bottom door trim.

10. Re-install hinges and door trim in opposite locations

as shown in the images below.

11. Open the hinges. Install door by sliding the hinges

behind the screw heads. Tighten screws.

12. Re-install all remaining cabinet and door trims.

Re-install the gasket. Make sure that the gasket is

fully seated in the pocket.

Screws

INSTALLATION INSTRUCTIONS

Gasket

WARNING

Door Hinge Pinch Point

Hazard

While closing the hinge, keep fingers away from the

internal moving parts of the hinge.

Trim Screws

Loading ...

Owner's Manual and Installation Instructions - Page 13