Loading ...
Loading ...
Loading ...
9
IMPORTANT
� NOTES:
• A clearance of
1
/
2
" (1.3 cm) must be maintained above the
top grille in order for the top grille to be removed.
• Do not remove the foam gasket from the top of the
compressor cover unless removal is necessary to fit the unit
under a soffit. Removal of the gasket will cause loss in
cooling efficiency.
• If installing under a solid soffit, after, installation raise the
leveling legs so that the gasket is pressed snugly against
the soffit.
A. Gasket
B. Compressor cover
� A grounded 3 prong electrical outlet should be located within a
specified number of inches from the right-hand side cabinets
or end panel. See the chart following the graphic for the
number of inches required for your model. For more
information, see "Electrical Requirements."
� The water shutoff should be located in the base cabinet on
either side of the refrigerator or some other easily accessible
area. If the water shutoff valve is not in the cabinets, the
plumbing for the water line can come through the floor. See
"Water Supply Requirements" for more information.
Model Width A (as
shown above)
Dimension B (as
shown above)
36 36" (91.4 cm) 4" (10.2 cm)
42 42" (106.7 cm) 7
1
/
2
" (19.1 cm)
48 48" (121.9 cm) 13
1
/
2
" (34.3 cm)
NOTE: Flooring under appliance must be at same level as the
room Face of cabinetry must be plumbed.
Installation Type Depth C (as
shown above)
Standard Flush
(new installation)
25" (63.5 cm)
minimum
Retrofit Installations 24" (60.9 cm)
minimum
NOTE: On retrofit installations, door panels will not be flush with
adjacent cabinets.
Loading ...
Loading ...
Loading ...