Loading ...
Loading ...
Loading ...
en Programmes
12
Cancelling
Press the "stop" button twice, or open the door and
press the "stop" button once.
PProgrammes
Pr ogr ammes
You can prepare food really easily using the various
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
Note: You can choose from 7 programmes.
Setting a programme
Once you have selected a programme, make settings
as follows:
1. Press the ` button repeatedly until the required
programme number appears.
The indicator light above the button lights up.
2. Press the h button.
The indicator light above the button lights up and a
suggested value appears in the display.
3. Use the rotary selector to set the weight of the dish.
4. Press the "Start" button.
The cooking time for the programme starts counting
down.
The cooking time has elapsed
A signal sounds. Open the appliance door or press
Stop. The clock reappears.
Correction
Press the "stop" button twice and reset.
Pausing the appliance
Press the Stop button once or open the appliance door.
This pauses the appliance. The indicator above the
Stop button will light up.After closing the door, press the
Start button again.
Cancelling
Press the "stop" button twice, or open the door and
press the "stop" button once.
Notes
■ For some programmes, a signal sounds after a
certain time. Open the appliance door and stir the
food or turn the meat or poultry. After closing the
door, press the "Start" button again.
■ You can query the programme number and weight
using
` or h. The queried value is shown for
3 seconds in the display.
Defrosting using the automatic programmes
You can use the 4 defrosting programmes to defrost
meat, poultry and bread.
Notes
■ Preparing food
Use food that has been frozen at -18 °C and stored
in portion-sized quantities that are as thin as
possible.
Take the food to be defrosted out of all packaging
and weigh it. You need to know the weight to set the
programme.
■ Liquid will be produced when defrosting meat or
poultry. Drain off this liquid when turning meat and
poultry and under no circumstances use it for other
purposes or allow it to come into contact with other
foods.
■ Ovenware
Place the food in a microwaveable shallow dish,
e.g. a china or glass plate, but do not cover.
■ Resting time
The defrosted food should be left to stand for an
additional 10 to 30 minutes until it reaches an even
temperature. Large pieces of meat require a longer
standing time than smaller pieces. Flat pieces of
meat and items made from minced meat should be
separated from each other before leaving to stand.
After this time, you can continue to prepare the food,
even though thick pieces of meat may still be frozen
in the middle. The giblets can be removed from
poultry at this point.
■ Signal
For some programmes, a signal sounds after a
certain time. Open the appliance door and separate
the food out or turn the meat or poultry. Close the
door and press the Start button.
VWRSVWDUW
VWRSVWDUW
VWRSVWDUW
PLQ
NJ
NJ
Basic settings en
13
Cooking with the automatic programmes
With the 3 cooking programmes, you can cook rice,
potatoes or vegetables.
Notes
■ Ovenware
The food must be cooked in microwaveable
cookware with a lid. For rice, you should use a large,
deep dish.
■ Preparing food
Weigh out the food. You need to know the weight to
set the programme.
Rice:
Do not use boil-in-the-bag rice. Add the required
amount of water, as specified on the packaging. This
is usually two or three times the quantity of rice.
Potatoes:
For boiled potatoes, cut the fresh potatoes into
small, even-sized pieces. Add one tablespoon of
water for each 100 g boiled potatoes, and a little
salt.
Fresh vegetables:
Weigh out the fresh, trimmed vegetables. Cut the
vegetables into small, even-sized pieces. Add a tbsp
water for each 100 g vegetables.
■ Signal
While the programme is running, a signal sounds
after some time. Stir the food.
■ Resting time
Once the programme has finished, stir the food
again. You should leave it to stand for another
5 to 10 minutes until it reaches an even temperature.
The cooking result will depend on the quality and
consistency of the food.
QBasic settings
Ba s i c s et t i ngs
Your appliance has basic settings that you can change
to suit your needs.
You can change the button tone on your appliance if
you wish.
Changing the button tone
The appliance must be switched off when you do this.
1. Press and hold the start and stop buttons at the
same time for a couple of seconds.
‚ will appear in the display.
2. Touch the start button.
Ž will start flashing in the display.
3. Turn the rotary selector to Œ.
4. Touch the start button.
The setting has been applied.
5. Touch the stop button.
The button tone has been switched off.
You can change this setting at any time.
Programme no. Weight range in kg
Defrost
P 01 Minced meat 0.20 - 1.00
P 02 Pieces of meat 0.20 - 1.00
P 03
Chicken, chicken
pieces
0.40 - 1.80
P 04 Bread 0.20 - 1.00
Programme no. Weight range in kg
Cooking
P 05 Rice 0.05 - 0.2
P 06 Potatoes 0.15 - 1.0
P 07 Vegetables 0.15 - 1.0
Setting Options
‚
Button tone
Ž*
Switched on
Œ
Switched off
Button tone (will remain active for
the start and stop buttons)
ƒ
Demo mode
š“‹
The appliance is switched off. You
can use the buttons and the display,
but the buttons will not activate any
function on the appliance (i.e. the
microwave has no power). Demo
mode is mainly used by dealers.
* Factory setting (factory settings may vary depending on the appli-
ance model)
Loading ...
Loading ...
Loading ...