Loading ...
Loading ...
Loading ...
54 English
Maintenance
Maintenance
8. After inserting the sheet 2, press down
the glass clips and check if they secure
the glass sheet properly.
9. Follow steps 1-2 above in the reverse
order to reinstall the coverings.
WARNING
To prevent heat leaks, make sure you properly reinsert the glass sheets.
Dual door glass (applicable models only)
1. Tie the wet tissue to stick.
2. Put on the towel below door.
3. Clean the door.
4. Apply detergent to tissue and clean
again.
5. Wipe the dry tissue to the moisture and
bubble.
CAUTION
Do not detach the door for cleaning.
02
4. Remove the second sheet from the door
in the arrow direction.
03
5. Remove the third sheet from the door in
the arrow direction.
6. Clean the glass with soapy water and a
clean cloth.
02
03
01
01 Support clip 1
02 Support clip 2
03 Support clip 3
7. When done, reinsert the sheets as
follows:
• See the picture and locate the hinges.
Insert sheet 3 below support clip 1,
sheet 2 between support clip 1 and 2,
and sheet 1 into support clip 3 in this
order. Make sure the printed side of
sheets is inserted inward.
CAUTION
To identify the correct side of the sheet,
locate the “PYRO” mark on the corner of
every sheet.
Correct direction: PYRO-
**
-
**
Wrong direction:
FULL MANUAL_NV7B5765XAK_U4_DG68-01412D-00_EN.indd 54FULL MANUAL_NV7B5765XAK_U4_DG68-01412D-00_EN.indd 54 2022-04-19 오후 4:59:552022-04-19 오후 4:59:55
Loading ...
Loading ...
Loading ...