Loading ...
Loading ...
Loading ...
1. Press the Start/Pause button to set
the appliance to pause.
The related indicator flashes.
2. Press the Delay Start button
repeatedly until the display shows .
3. Press the Start/Pause button again to
start the programme immediately.
10.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press the Start/Pause button.
The related indicator flashes.
2. Change the option set.
3. Press the Start/Pause button again.
The programme continues.
10.11 Cancelling a running
programme
1. Press the On/Off button to cancel the
programme and to deactivate the
appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.12 Opening the door
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
1. Press the Start/Pause button .
In the display the related door lock
indicator goes off.
2. Open the appliance door.
3. Close the door and press the Start/
Pause button .
The programme or the delay start
continues.
10.13 End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates.
In the display comes on and the door
locked indicator
goes off.
The indicator of the Start/Pause button
goes off.
1. Press the On/Off button to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door ajar, to prevent mildew
and odours
10.14 Draining water out after
end of cycle
The washing programme is
completed, but there is water in the
drum:
The drum turns regularly to prevent the
creases in the laundry.
The door lock indicator is on. The
door stays locked.
You must drain the water to open the
door:
1. If necessary, decrease the spin
speed.
2. Press the Start/Pause button.
The appliance drains the water and
spins.
3. When the programme is completed
and the door lock indicator
goes
off, you can open the door.
4. Press the On/Off button some
seconds to deactivate the appliance.
ENGLISH 25
Loading ...
Loading ...
Loading ...