Loading ...
Loading ...
Loading ...
7.2 Introduction
The options/functions are
not selectable with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
7.3 Temperature
When you select a washing programme,
the appliance automatically proposes a
default temperature.
By means of this option you can change
the default temperature and set the
desired one, the relevant indicator
illuminates.
If you set programme Cottons at 20 °C
the appliance does not heat the water.
7.4 Spin
When you set a programme, the
appliance automatically sets the default
spin speed.
Tap on this button repeatedly to change
the spin speed or to set:
Activate the Rinse Hold option
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The door stays locked and the drum
turns regularly to reduce creasing.
• You must drain the water to unlock
the door.
• If you touch the Start/Pause button,
the appliance performs the spinning
phase and drains the water.
The appliance empties the
water out automatically after
18 hours approximately.
Activate the No Spin option
• Set this option to deactivate all spin
phases. Only the drain phase is
available.
• The related indicator comes on.
• Set this option for very delicate
fabrics.
• The rinses phase uses more water for
some washing programmes.
The spin speed can be
reduce.
7.5 Prewash
Use this option to add a pre-wash phase
before the washing phase.
This option is recommended for heavily
soiled laundry, especially if containing
sand, dust, mud and other solid particles.
To activate/deactivate this option, touch
the Temperature and the Spin buttons
simultaneously until the indicator
comes on/goes off on the display.
The options can increase the
programme duration.
7.6 Dryness Level
By means of this button you can set one
of the 3 automatic dryness levels
proposed by the appliance, in the
programmes where there are selectable.
The relevant dryness level indicator goes
on:
• Iron Dry: laundry to be ironed.
• Cupboard Dry: laundry to be put in
store.
• Extra Dry: laundry to be fully dried.
You can not set all
automatic levels for each
type of fabrics.
7.7 Stains
Select this option to add an anti-stain
phase to a programme in order to treat
heavily soiled or stained laundry with
stain remover.
Pour the stain remover into compartment
. The stain remover will be added in
www.aeg.com14
Loading ...
Loading ...
Loading ...