Loading ...
Loading ...
Loading ...
Oven Door
Leveming Legs
Do not p!ace excessive weight on or stand on an open
oven door. This CouM cause the range to tip over, break
the doorl or injure the user.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Storage Drawer
Do not store pUastic,paper products, food or fiammabUe
for these items when the oven is in use.
The storage drawer can be removed to aiiow you to clean
under the range.
To remove:
1. Empty'drawer and pull out to the first stop position.
2. Lift up the front of the drawer.
3. Pull out to the second stop position.
4. Grasp sides and lift drawer up and out.
To replace:
1. Fit the ends of the drawer glides into the rails in the range.
2. Lift up the front of the drawer and gently push in to the
first stop position.
3. Lift drawer up again and push until drawer is closed.
Be sure the anti:t!p bracket secures one o[ the
rear [eveiing iegs to the floor. Thi s bracket pre_
vents the range from accidentally tipping,
The range should be leveled when installed. If
the range is not level, turn the plastic _ _
leveling legs, located at each corner of
the range, until range is level. ANTI-1IP
BRACKET
LEVELING LEG
Oven Light
o Make sure bu!b Cover and bulb are cool before touching,
To replace oven light bulb:
1. When oven is cool, hold bulb cover BUL_OOVER
in place, then slide wire retainer
off cover. NOTE: Bulb cover
wiii fail if not held in place
while removing wire retainer.
2. Remove bulb cover and light
RETAINER
bulb.
3. Replace with a 40-watt appliance bulb.
4. Replace bulb cover and secure with wire retainer.
5. Reconnect power to range. Reset clock.
Convenience Outlet
(Canadian models only}
The convenience outlet is located on the
lower left side of the backguard. Be sure
appliance cords do not rest on or near
the surface elemenL If the surface
dement is turned on, the cord and
outlet will be damaged.
The convenience outlet circuit breaker
may trip if the small appliance plugged
y-
CIRCUIT BREAKER
into it exceeds 10 amp& To reset the circuit breaker, press the
switch located on the lower edge of the backguard.
2O
Loading ...
Loading ...
Loading ...