Arris G34 User Guide

Loading ...

Figure 28: G34/G36 Wi-Fi c

onnecon screen (1 of 2)

Note: When AP Isola

on is enabled, each of your Wi-Fi clients will be in its own

virtual network and will not be able to communicate with the other Wi-Fi clients.

This may be useful if several guests are using your Wi-Fi network.

15. To turn ON the 2.4 GHz Wi‑Fi frequency range for your Wi-Fi home network, click the 2.4

GHz Radio submenu and then click Enable buon .

16. Select the wireless networking standard mode for your Wi-Fi home network from the

Mode drop-down list.

17. Select the Tx (Transmit) Power level of the Wi-Fi radio from the Tx Power drop-down list.

18. Select a channel number (Auto, 1 through 11) from the Channel drop-down list to set

the communicaons channel for your Wi-Fi cable modem.

Note: F

or 2.4 GHz Wi-Fi networks, it is recommended to use Channel 1, 6, or 11, if

it is not listed as the Current Channel. In the Wi-Fi spectrum, there are mulple

channels that overlap and thus degrade Wi-Fi network performance. Channels 1,

6, and 11 are used for beer network performance and stability because they do

not overlap.

19. Set the channel bandwidth for your Wi-Fi cable modem from the Channel Bandwidth

box.

20. To enable the dynamic channel selecon opon, click Enable .

21. To set the DCS scan interval, you can choose from the DCS Scan Interval drop-down list.

22. Click SAVE SETTINGS to save the changes.

Chapter 7: Conguring your Wi-Fi ne

twork

SURFboard

G34/G36 DOCSIS

3.1 Wi-Fi

Cable Modem User Guide STANDARD Revision x.5 37

Loading ...

Arris G34 Surfboard DOCSIS 3.1 Gigabit Cable Modem & Wi-Fi 6 Router (AX3000) | Approved