Loading ...
Loading ...
Loading ...
15
BEFORE FIRST USE
11. At the end of use, always ensure the
blender is turned to the OFF position.
Then switch the appliance off at the
power outlet and unplug the cord.
Ensure the motor and blades have
completely stopped before attempting to
move the appliance, or when the blender
is not in use and before disassembling,
cleaning and storing.
NOTE
During the blending process,
ingredients may stick to the side of
the blender jug. To push the food back
onto the blades, turn the blender to
the OFF position, switch off at the
power outlet and remove the power
cord. Remove the lid and use a plastic
spatula to scrape down the sides
of the jug. Replace the lid before
recommencing blending.
NOTE
If any moisture or liquid appears on
top of the motor base during blending,
turn the blender to the off position,
switch off at the power outlet and
remove the power plug. Remove the
blender jug. Wipe the motor base
immediately with a dry cloth or paper
towel to absorb the liquid.
DISASSEMBLING YOUR FOOD
PROCESSOR AND BLENDER FOR
CLEANING, CARE AND STORAGE
1. Always ensure the food processor or
blender is off by turning the dial to the
OFF position. Then switch off at the
power outlet and unplug the power cord.
2. Rotate the food processor bowl/blender
jug clockwise until it lifts off the
motor base.
WARNING
Be careful when handling the food
processing and blending blades as
they are sharp. Mishandling of the
blades may cause injury.
WARNING
Never place anything other than food
and liquids in the food processor and
blender whilst the motor is running.
OVERLOAD PROTECTION SYSTEM
The motor is protected from burning out by
an automatic cut-out switch. If the appliance
is overloaded or operated continuously for
too long, the motor may overheat and stop.
To operate the appliance again, you must
switch off, unplug and allow to cool for
approximately 30 minutes. Once the motor
has fully cooled, it is ready for use again.
Some stiff mixtures, such as dough, may
cause the dough blade to rotate more slowly
than normal. In this unlikely event of an
excessive load, do not operate the appliance
continuously with excessive load for more
than 1 minute.
If this occurs again, the processing bowl
may be overloaded, so remove some of the
food and process in smaller batches.
NOTE
The food processor is designed so
the motor will not operate without
the processing bowl and lid correctly
locked into position. In the event that
the food processor starts without the
lid correctly locked into position,
immediately disconnect at the power
outlet and return to your local Breville
Service Centre for examination.
Loading ...
Loading ...
Loading ...