Loading ...
Loading ...
Loading ...
page 9
9. Switch Housing Assembly. (cont.)
Connect female plug from switch housing to
male plug from motor housing, matching up
the colors on the female plug with the colors
on the male plug for correct fit. Be sure the
plugs connect completely.
Align holes in switch housing with holes in
switch housing plate. Re-insert screws that
were previously removed and securely
tighten all 4 screws with a Phillips
screwdriver.
switch housing
plate
switch
housing
motor
housing
male
plug
female
plug
10. Testing Your Fan.
It is recommended that you test fan before
finalizing installation. Restore power from circuit
box and light switch (if applicable). Test fan
speeds with pull chain. (diagram 1) Start at the
OFF position (no blade movement). First pull will
set the fan to HI. Second pull will set the fan to
MEDIUM. Third pull will set the fan to LOW.
Fourth pull will again set the fan to the OFF
setting. If fan does not function, please refer to
"Troubleshooting" section to solve any issues
before contacting Customer Service.
Turn fan completely off before moving the
reverse switch. Set reverse switch to recirculate
air depending on the season:
- LEFT position in summer (diagram 2)
- RIGHT position in winter (diagram 3)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
Important: Reverse switch must be set either
completely to the LEFT or completely to the RIGHT
for fan to function. If the reverse switch is set in
the middle position (diagram 4), fan will not
operate.
Attach pull chain extension supplied or custom
pull chain extension (sold separately) to the end
of the pull chain.
diagram 1
diagram 2 diagram 3 diagram 4
pull chain
extension
reverse
switch
Loading ...
Loading ...
Loading ...