Loading ...
Loading ...
Loading ...
page 6
5. Fan Assembly. (cont.)
NOTE: The important safety precautions and
instructions appearing in the manual are not
meant to cover all possible conditions and
situations that may occur. It must be
understood that common sense and caution
are necessary factors in the installation and
operation of this fan.
hanging ball slot
hanging bracket tab
motor housing
safety
cable
safety cable loop
wood
ceiling
joist
wood screw
and washer
With the hanging bracket secured to the
outlet box and able to support the fan, you
are now ready to hang your fan. Grab the
fan firmly with two hands. Slide downrod
through opening in hanging bracket and
let hanging ball rest on the hanging
bracket. Turn the hanging ball slot until it
lines up with the hanging bracket tab.
WARNING: Failure to align slot in hanging
ball with tab in hanging bracket may result
in serious injury or death.
Tip: Seek the help of another person to
hold the stepladder in place and to help lift
the fan up to you once you are set on the
ladder.
Find a secure attachment point (wood
ceiling joist highly recommended) and
secure safety cable. It will be necessary to
use a heavy duty wood screw, washer and
lock washer (not supplied) to secure safety
cable loop. If necessary, adjust the loop at
the end of the safety cable. The loop at the
end of the safety cable should just fit over
the threads on the wood screw. Test safety
cable by pulling on loose end of cable with
pliers. If the safety cable slips, the loop must
be adjusted smaller.
Extra cable slack can be left in ceiling area.
Loading ...
Loading ...
Loading ...