Loading ...
Loading ...
Loading ...
page 8
8. Blade Assembly.
WARNING: To reduce the risk of serious
bodily injury, DO NOT use power tools to
assemble the blades. If screws are
overtightened, blades may crack and break.
Time Saver: Washers for blade screws can
be set on each blade screw prior to
installing blades.
Locate 15 blade attachment screws and
washers in one of the hardware packs.
Hold blade arm up to blade and align
holes. Insert 3 blade attachment screws
(along with washers) with fingers first
and then tighten screws securely with a
Phillips screwdriver. Repeat for the
remaining blades.
Remove blade arm screws/lock washers
from underside of motor. Align blade arm
holes with motor screw holes and attach
blade arm with blade arm screws/
lock washers. Before securing screws
permanently, repeat with remaining
blade arms. Securely tighten all screws.
NOTE: Tighten blade arm screws twice a
year.
blade arm screws/
lock washers
motor housing
blade arm
blade
blade attachment
screws and washers
9. Switch Housing Assembly.
Remove 4 screws from outer edge of
switch housing plate (save screws for later
use).
Remove 1 screw from fitter plate on
underside of motor and partially loosen
the other 2 screws. Align slotted holes in
center of switch housing plate with
loosened screws in fitter plate, allowing
male plug from motor housing to come
through hole in middle of switch
housing plate. Twist switch housing plate
to lock. Re-insert screw that was just
removed and secure all screws.
["Switch Housing Assembly"
continued on next page.]
fitter plate
motor
housing
switch housing
plate
male plug
Loading ...
Loading ...
Loading ...