Loading ...
Loading ...
Loading ...
Clock and Timer
Wall Oven
CZD CZD CSZD
[_ ON PREHEAT
UPPER OVEN
CLOCK COCK
@ © @T,ME
(::_) (:_:) (::_::)
PREHEAT ON
LOWER OVEN
TIMER START
Q@ ©T,ME
f
-}o,,
SET
MANUAL
Doubleoven clock and timer
©
CLOCK COOK
@© @TIME
TIMER START
@© @TIME
f
k
© A T_MEO
®sE (D
©v
Single oven clock and timer
MANUAL 1
©
Using the
clock and
timer
When you first turn on the power to your oven,
or after a power failure, the display will show all
8% then dashes and the set clock symbol.
To set or change the time of day, press the
CI£)CK button. The control will beep. The set
clock symbol will appear in the display.
Press the increase • (rdeclease • butt(n.
If the increase "•" or decrease "•" button is
pressed and released, it will change the time in
one minute increments. If the increase "•" or
decrease "•" button is pressed and held, the
time will change in 10 minule increments.
Once the clock is set, press the CLOCK button
again. The control will beep and the set clock
symbol will disappear.
To check the time of day when the timer is in
use press the CLOCK button. The time of day
will be displayed briefly and then will return to
the timer function.
The timer button does not control oven
functions. The timer may be used as a
convenient kitchen timer.
To set, press the TIMER button. The control
will beep, The display will show ":00" and the
words SET TIMER,
(_dec_ease • butt(nPress the increase "• .......
to set the amount of time desired.
If the increase "•" or decrease "•" button is
pressed and released, it will change the time in
one minute increments. If the increase "•" or
decrease "•" button is pressed and held, the
time will change in 10 minute increments.
The timer will start after approximately 4
seconds. The colon blinks when the timer starts
counting down. The word TIMER will remain
in dae display- during the countdown. The
timer will count down in minutes until the last
minute, then it will count down in seconds.
When timing is complete the word TIMER
will blink and dae control will beep three times.
The display will return m the time of day or any
active programmed function and the control
will beep twice eveIy 10 seconds until any
button is touched.
To cancel the timer, press the TIMER button
once, If no time is set, dae timer cancels itself
after approximately 5 seconds. The time of day
is then displayed.
Loading ...
Loading ...
Loading ...