Loading ...
Loading ...
Loading ...
Usingthe oven. gecem
Toavoid possible bums, place the racks in the desired position before you turn the oven on.
30"ovens(shown)have7rack
positions.
27"ovenshave4rackpositions.
Before you begin...
The rack,4 have stop-locks, so that when
placed correctly on tile suI)I)orts , they will
stop beti)re coming completely out, and
will not tilt.
_&_/en I)lacim"_ and remo'4ng, cookware,
pull the rack out to the bmnp on the
rack SUl_pom
Toremove a rack, pull it toward you,
tilt the fl'ont end up and pull it out.
Toreplace, place the end of the rack
(StOlMOCkS) on tile sui)port, tilt up tile
ti'ont and push tile rack in.
How to Set the Oven for Baking or Roasting
[] Press the BAKE pad.
] Press tile ntllllbeI" pads to set tile
desired temperature.
[] Press the START pad.
[] Check ti)od Ira" aloneness at
minimum time on recipe. Cook
longer if necessac}.
[] Press the CLEAR/OFFpad when
cooking is complete.
NOTE:A coolingfanmayautomaticallyturnon
andoff tocoolinternalparts.Thisisnormal,and
thefanmaycontinuetorunevenaftertheovenis
turnedoff.
Rack Position
Typeof Food 27" Oven 30" Oven
Frozenpies BorC CorD
(oncookiesheet)
Angelfoodcake A B
Bundtorpoundcakes B B
Biscuits,muffins, BorC CorD
brownies,cookies,
cupcakes,layer
cakes,pies
Casseroles BorC CorD
Preheating and Pan Placement
Preheat the oven if the recipe calls fi:,r it.
To preheat, set tile oven at tile correct
temperature. Preheating is necessary tiw
good results when baking cakes, cookies,
pastry and breads.
Forovenswithout apreheat indicatorfl)ht or
tone,preheat 10minutes.
Baking results will be better if baking pans
_lI'e centered in tile oven _ls Illtlch _ls
possible. Pans should not touch each
other or the walls of the oven. If um need
to rise tWO I'aC]¢% stagger the pans so one
is not directly above the othe_; and leave
appro_mately 1½" between pans, fl'om
the ti'ont, back and sides of the wall.
Cutslitsin the Niljust fikothe grid.
Aluminum Foil
You can use _dmninmn tk_il to line the
broiler pan and broiler gad. Howe_ el;
?ou must rooM the foil tightl_ to the grid
and cut slits in it just like tile grid.
Aluminumfoil maya#o be usedto catch a
spillover
Ne\w" entirely cover a lack with
aluminmn fifil. This will disturb tile heat
circulation and result in poor baldng.
A smaller sheet of fkfil may be used to
catch a spillover by plating it on a lower
rack several inches below tile fk)od.
9
Loading ...
Loading ...
Loading ...