Loading ...
Loading ...
Loading ...
Let’s talk technical
IMPORTANT: Rotate brushroll manually to make sure the belt is properly installed. Vacuum is
equipped with an automatic brushroll shut-o in event of overload or jam. Check for obstructions
in the brushroll area and remove any obstructions.
Slide belt over motor
shaft with the lettering
on the outside of the
belt.
Slide other end of
belt around end of
brushroll.
With belt in place,
slide brushroll into
nozzle making sure
that the brushroll end
caps are in the correct
orientation.
Replace the bottom
plate and reinstall the
6 screws as shown.
LUBRICATION NOT REQUIRED
The motor and brushroll are
equipped with bearings which
contain sucient lubrication for
their lifetime. The addition of
lubricant could cause damage.
Do not add lubricant to motor
or brushroll.
TIP
Cleaning the brushroll
CAUTION: To reduce the risk of injury from moving parts - unplug before servicing.
See us do it:
Hoover.com/video-instruction-guide
For additional maintenance required for
belt or brushroll please contact a HOOVER®
service provider at 1-800-944-9200.
Loading ...
Loading ...
Loading ...