Loading ...
Loading ...
Loading ...
You may avoid inconvenience and service calls by checking these points before you call for service.
FOR YOUR SAFETY
WHAT TO DO IF YOU SMELL GAS
1. Do Not try to lightany appliance.
2. Do not touch any electric switch,do not use the phone.
3. Leave the building immediately,then call your gas supplier.
4. If you cannot reach the gas supplier,callthe fire department.
Possible Cause
Thermostat is not set correctly
Burner is not operating properly
No electric power to boiler
Controls out of adjustment
Radiators not heating
Circulating pump not running
Poor electrical contact
Chimney flue is blocked
Rollout switch blown
What to do
Reset thermostat
check flame. If it is yellow, .the burner is not getting enough air.
Or, if flame is blue and noisy and seems to lift off the burner, the
burner is getting too mush air. Contact your service technician.
Check overcurrent protection. Check to be sure electric power
supply circuit is "ON".
Reset according to instructions.
Open radiator vents to excess air. Check flow control valve (if
used). It may be in closed position.
Check overcurrent protection. Check relay operation.
Check all control terminals and wire joints.
Pressure switch will not close and pilot spark will not operate to
start pilot. Have your service technician check and correct, if
necessary.
Have your service technician check heat exchanged for blockage.
Replace rollout switch with exact replacement.
Possible Cause
Gas input amount is incorrect
What to do
Contact your service technician.
Possible Cause
HAVE YOUR SERVICE TECHNICIAN CHECKANY PROBLEM YOU ARE UNABLE TO CORRECT.
30
Loading ...
Loading ...
Loading ...