Loading ...
Loading ...
1. Readthe Owner'sManualfor SaleOperation
carefully. Failure to follow the rules for safe
operation and the instructions can cause a
malfunction of the boiler and result in death,
serious bodily in jury, and/or property damage.
2. Check your local codes and utility requirement
before installation. The installation must be in
accordance with their directives.
3. Before servicing, allow boiler to cool. Always
shut off any electricity and gas to boiler
when working on it. This will prevent any
electrical shocks or burns.
4. Never test for gas leaks with an open flame.
Use soap and check all connections. This
will avoid any possibility of fire or explosion.
5. Be certain your boiler will be using the
correct gas. Overfiring will result in
premature failure of the boiler sections and
cause dangerous operation.
6. Never vent this boiler into an enclosed
space. Always vent to the outside. Never
vent to another room or inside a building.
7. Be sure there is adequate air supply for
complete combustion.
8. Follow a regular service and maintenance
schedule for efficient and safe operation.
TOOLS
Pipe Wrench
Screwdriver
Tin Snips
6 foot tape or folding rule
Hack Saw
LP Torch, if you have copper piping
Pipe cutter and threading tools
(for iron pipe systems)
MATERIALS
Pipe joint compound suitable for natural and propane gas.
Iron or copper pipe for the water lines.
Black pipe for the gas lines.
Miscellaneous fittings.
Solder and flux if you have copper piping.
The following booklets will help you in making the installation:
Electrical Wiring -Available at Sears from the Plumbing, Heating or Electrical Departments at
nominal cost.
American National Standards, Installation of Gas Appliance and Gas Piping, National Fuel
Gas Code ANSIZ223.1 - latest revision.
Obtain from American Gas Association, 1515 Wilson Boulevard, Arlington (Roslyn), VA 22209
3
Loading ...
Loading ...
Loading ...