Loading ...
Loading ...
Loading ...
_,_ad_ IP'_'_Im]V-'_n_U_ j _vj_ln Ii
5.
6.
7.
Bolt Bottom
Panel
Auger
Housing
Figure 38
Remove screw from belt cover.
Remove the belt cover (see
Figure 36).
Loosen the auger belt guide. Pull
the auger belt guide away from the
auger drive pulley (see Figure 39).
Pull the idler pulley away from the
auger drive belt.
Remove the old auger drive belt
from the stack pulley and from the
auger drive pulley. Replace the
Traction Drive
Belt Guide
--k
auger drive belt with an original
equipment replacement belt avail-
able from a Sears service center.
8. Install the new auger drive belt
onto the auger drive pulley and
onto the stack pulley.
9. Adjust the auger drive belt. See
"How To Adjust The Auger Drive
Belt" in the Service And Adjustment
section.
10. Adjust the auger belt guide. See
"How To Adjust The Belt Guide" in
the Service And Adjustment section.
11. Install the belt cover. Tighten
screw (See Figure 36).
12. Check the adjustment of the cables.
See "How To Check And Adjust The
Cables" in the Service And Adjust-
ment section.
13. Install the bottom panel (see
Figure 38).
14. Tighten the bolts on each side of
the bottom panel.
15. Connect the spark plug wire.
Traction Drive Belt
Auger Belt Guide
Traction Drive Idler Pulley
\
Auger Idler Pulley
Stack Pulley
Auger Drive Belt
F-021073L 27
Traction
Drive Belt
Traction
Drive Pulley
Auger Drive
Pulley
Figure 39
Loading ...
Loading ...
Loading ...