Loading ...
Loading ...
Loading ...
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER. Compare the illustrations with your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Speed Shifter Lever _ Electric Chute Switch
Auger Drive Lever Traction Drive Lever
Gas Tank Remote Chute Chute
Control Lever Deflector
Choke
Control
Primer
Button
Discharge
Chute
Ignition
Key
Recoil
Starter
Handle
Drift Cutter
Height Adjust
;hear Pin
Scraper Bar Figure 13
Auger Drive Lever- Starts and stops
the auger and impeller (snow gathering
and throwing).
Traction Drive Lever - Propels the
snow thrower forward and in reverse.
Speed Shifter Lever - Selects the for-
ward and reverse speed.
Electric Chute Switch - Changes the
direction of snow throwing through the
discharge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute - Changes the height
and direction the snow is thrown.
Height Adjust Skid - Adjusts the ground
clearance of the auger housing.
Ignition Key - Must be inserted to start
the engine.
Recoil Starter Handle - Starts the en-
gine manually.
F-021073L 13
Choke Control - Used to start a cold
engine.
Primer Button - Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Remote Chute Control Lever - Con-
trols the distance the snow is thrown.
Throttle Control - Controls the engine
speed.
Electric Start Button - (if so equipped)
Used to start the engineusingthe 120V elec-
tric starter.
Shear Pin - Shear pins are designed to
break (to protect the machine) if an ob-
iect becomes lodged in the auger hous-
ing.
Toolbox - spare shear pins and
spacers are located in toolbox.
Drift Cutter -Cuts a path through snow
higher than the auger housing.
Loading ...
Loading ...
Loading ...