Loading ...
Loading ...
Loading ...
Cleaning and maintenance
84
Programmed vapour clean cycle set-up
Like the other cooking functions the time at
which the vapour clean cycle starts can be
set.
1. After having selected the special Vapour
Clean function, press the
symbol.
2. Enter the required end time for the
Vapour Clean function (for example
19.30: first touch the hours box, then the
numbers 1 and 9; next, touch the minutes
box and then the numbers 3 and 0).
3. Press the symbol to confirm.
The appliance waits for the set start time to
be reached and then starts the cleaning
cycle.
End of the Vapour Clean cycle
1. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
2. Use a non-scratch sponge with brass
filaments on hard to remove deposits.
3. In case of grease residues use specific
oven cleaning products.
4. Remove any remaining water from inside
the oven cavity.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven be dried
using a fan-assisted function at 160°C for
approximately 10 minutes.
We recommend wearing rubber
gloves for these operations.
We recommend removing the
door in order to make the manual
cleaning of the parts that are
difficult to reach easier.
Loading ...
Loading ...
Loading ...