Loading ...
Loading ...
Loading ...
[] INSTALLATION KITS CONTENTS
NO, NAME OF PARTS Q'TY
1 FRAME CU RTAH_ 2
2 SILL SUPPORT 2
3 BOLT 2
4 NUT 2
5
6
7
8
9
10
11
12
13
14
15
SCREW(TYPE B)
SCREW(TYPE C)
FOAM-STRIP
FOAMoPE
UPPER GUIDE
FOAM-PE
FRAME GUIDE
WINDOW LOCKING BRACKET
DRAIN JOINT PIPE
DRAIN WASHER
16
3
5
1
1
1
1
2
1
1
1
[] SUGGESTED TOOL REQUIREMENTS
I SCREWDRIVER(,,-),RULLER,KNIFE,HAMMER,PENCIL,LEVELI
PREPARATION OF CHASSIS
1. Remove the screws which fasten the cabinet at
both sides and at the back.
2. Slide the unit from the cabinet by gripping the
basie pan handle and pulling forward while
bracing the cabinet.
3, Remove EPS Material.
4, Cut the window sash seal to the proper length.
Peel off the backing and attach the foam-pe _9_
to the underside of the window sash.
5. Remove the backing from the top upper guide
Foam PE _-i!;,and attach it to the bottom of the
upper guide ,:_:,,
6, Attach the upper guide onto the top of the
cabinet with 3 type A screws,
7. Insert the frame guides ,,:i_into the bottom of the
cabinet.
8. Insert the Frame Curtain J_iinto the upper guide
_#;_and frame guides ®.
9, Fasten the curtains to the unit with 4 Type A
screws.
Shipping screws
EPS Maledal
(Type A)
Loading ...
Loading ...
Loading ...