Loading ...
Loading ...
Loading ...
[] Installation Kits Contents
NO. NAME OF PARTS Q'TY
1 FRAME CURTAIN 2
2 SILL SUPPORT 2
3 BOLT 2
4 NUT 2
5 SCREW(TYPE A} 16
6 SCREW(TYPE B) 3
7 SCREW(TYPE C) 5
8 FOAM-STR]P 1
9 UPPER GUIDE 1
I 0 FOAMoPE 1
11 FRAME GUIDE 2
I 2 WINDOWLOCKING8RACKET 1
13 FOAM-PE 1
14 DRAIN JOINT PIPE 1
15 DRAIN WASHER 1
[] Suggest_ Tool Requirements
SCREWDRIVER(+, -), RULER:, KNIFE, HAMMER, PENCIL, LEVEL
PREPARATION OF CHASSIS
,
Remove the screws which fasten the cabinet
at both sides and at the back,
Slide the unit from the cabinet by gripping the
base pan handie and pulling forward while
bracing the cabinet,
Shipping
I
,
,
Cut the window sash seal to the proper
length,
Peel off the backing and attach the foam pe
@ to the underside of the window sash.
Remove the backing from the top upper gu:[de
Foam PE ,:!0:and a_ach it to the bottom of the
upper guide ,_.
5, Attach the upper guide onto the top of the
cabinet with 3 type A screw&
6_
.
Insert the frame guides @ into the bosom of
the cabinet,
Insert the Frame Curtain ,:_;,into the upper
guide, ,:197and frame, guides :f1_,
(Type A)
8. Fasten the curtains to the unit with 4 Type
A screws.
(Type A)
Loading ...
Loading ...
Loading ...