Loading ...
Loading ...
Loading ...
SERVnCE AND ADJUSTMENT
HOW TO REPLACE THE LIGHT BULB
1, Raise the tractor hood,
2. Pull the tight socket from the bezel.
3 Pull the light bulb from the socket
4 Install a new light bulb Push the socket into the bezel.
HOW TO CLEAN THE MOWER HOUSING
_ WARNING: Before you clean the mower housing.
stop the engine and disconnect the wire to the
spark plug.
Grass and other debris 0n top of the mower housing can keep the
belt,from working correctly. Clean the mower' housing as follows=
1, Move the lever for the blade engagement control to the
ENGAGE position°
2,, Clean the top of the mower housingv
3. Move the lever for the blade engagement control to the
DISENGAGE position.
4,, Again clean the top of the mower housing_
5. After you out the grass, clean the bottom of the mower
housing°
D-5748
,H. i
HOW TO CLEAN THE UNIT
WARNING: Before you clean the grass bagger or
the top of the mower housing, stop the engine_
Disconnect the wire to the spark plug.
For good performance, frequently clean the grass bagger as
follows,,
1 Clean the extension tube, the connector tube, and the elbow
with soap and water
2_ To clean the wlndow(s), first remove the screws that hold the
window(s). To release the window tabs, press on the cover
directly above the window tabs. Clean the window(s} with
soap and water.
3. For correct operation of the belt drive system, clean the top
and the bottom of the mower housing as follows.
4, Put the blade control lever in the ENGAGE position
5 Remove grass and debris from the top of the mower
housing°
6. Put the blade control lever in the DISENGAGE position.
7_ Remove grass from the top of the mower' housing.
8_ Clean the bottom of the mower housing,
Push Cover Here
To Remove Wi
W_ndow
Elbow
F-91726 40
Loading ...
Loading ...
Loading ...