Loading ...
Loading ...
Loading ...
6,
7_
From the right side of the unit, install the channel pin throug h
the channel as shown, Rotate the channel pin to lock the
channe_ in place,
Mount the outer tube to the channel as shown, Make sure the
holes on one end of the outer tube are on the right side of the
unit, Use the fasteners shown full size below Make sure the
fasteners are tight_
CAUTION: If the fasteners are tightened too much, the
outer tube can be damaged.
©
IF) (G)
6xg3 t8x 15
@
(H)
15x32
(F)
Channel Pin
(G)
Rotate
Channel Pin
Counterclockwise
Make sure these
holes are to the
right side of the
unit
e-8!21
8 Mount the center tube to the channel as shown Make sure
the fasteners are tight,
CAU'flON: If the fasteners are tightened too much, the
center tube can be damaged,
9. Attach the caps to the end of the tubes as shown
Channel
Center Tube
(F}
6x93
G Q
(G) (H)
! 8x 15 15x32
(F)
F-91726 1 5
Loading ...
Loading ...
Loading ...