Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENT
.,I,,,,,,,,,UUl1' J =l, n ,1 Iml Un
HOW TO REMOVE THE MOWER HOUSING
1- Move the lift lever to the lowest position,
2_ Move the blade engagement control lever to the
DISENGAGE position.
3- Remove the hair pins and the washers from the adjusting
rods. See illustrations "C" and "D" below,,
4. Remove the hair pins and the washers from the suspension
link and the adjuster p!ateo See illustrations "A" and "B"
below.
5 Remove the hair pin and washer from the blade control rod.
See illustration "E" belowo
6. Disconnect the front hanger from the axle support._ See
illustration "F" below°
7,. Remove the mower drive belt from the stack pulley,
& Pull the mower housing away from the dght side of the
unit,,
HOW TO INSTALL THE MOWER HOUSING
1.
2_
Push the mower housing under the right side of the unit.
Put the mower drive belt around the stack pulley,,Make sure
the "V" side of the mower drive belt is against the stack
pulley_Also, make sure the mower drive belt is not twisted.
3. Attach the front hanger to the axle support with the hanger
rod. Fasten with the fasteners as shown. See illustration
"F" beEow,.
4. Make sure the mower drive belt is between the stack pulley
and the belt guide.
5,, Fasten the control rod to the blade engagement c0ntrol with
the washer and hair pin. See illustration "E" below.
6. Attach the suspension link and the adjuster plate to the lifter
assembly, Fasten with the washers and hair pins, See
illustrations "A" and "B" below.
7, Attach the right and,the left adjusting rods to the suspension
brackets, Fasten with the washers and hair pins,.-See
illustrations "C" and "D" below_
8. Move the blade engagement control to the ENGAGE posi=
tion. Make sure the mower drive belt is inside all the belt
guides
9. Make sure the mower housing is level See the instructions
on "How To Level The Mower Housing"
! 0,. Check the operation of the blade engagement control° See
the instructions on "How To Check And Adjust The Blade
Engagement Control".
Lifter Assembly
Blade Engagement
Control Lever
D=5705
F-91726
BeEtGulde
Mower Orive
Be_t
36
D
Rod
Loading ...
Loading ...
Loading ...