Loading ...
Loading ...
3
WARNING
The barbecue has been evaluated for safety only with one
griddle plate. Use of more may create an unsafe condition.
Gas Installation Codes
The appliance is certified
To AS 5263.0 and 5263.1.7 by AGA
Barbecue must be used in accordance with the
installation requirements of your local gas supply
authority, and the appropriate installation standard
AS 5601.
Gas Connection Requirements.
The regulator supplied with the barbecue must be used.
The regulator is supplied with a POL cylinder connection
for connection to a 9 kg gas cylinder.
The regulator supplied has a outlet pressure of 2.75 kPa
This pressure is preset and cannot be adjusted.
USE OF BARBECUE UNDER OVERHEAD
While acceptable locations to use the barbecue are shown
on page 6. Char-Broil recommends not to use the barbecue
under any overhead. The smoke from cooking, especialy
with IR cooking, contains grease particles which will deposit
on the overhead.
Specification
3 main burners at 8.43 MJ/h each
1 side burner at 13.7 MJ/h
Total 39.0 MJ/h
Gas consumption @ 2.75 kPA
Injector size
Main burners - 0.82 mm
Injector size
Side burner - 1.07 mm
Check that "o" ring seal between the appliance
and the gas container are in place and in good
condition before connecting the gas container
Do not use this appliance if it has damaged or
worn "o" ring seal.
Each time prior to connecting regulator to
cylinder verify “o” - ring is in position as shown
below.
If damaged or missing replace prior to use.
WARNING
Leak check the regulator cylinder connection at
each use as shown on page 5.
Recommended Maintenance
Each Use
Clean and oil cooking grate assemblies
Clean/Inspect firebox
Clean grease tray
Check gas supply hose for cracks/leaks
Check gas regulator for leaks
Check that all gas fittings are tight
Every 6 months
Clean/Inspect burners and venturis
Check burners for corrosion
Others
Leak checks as specified in guide
Seal
O-Ring
Loading ...
Loading ...
Loading ...