Loading ...
Loading ...
Loading ...
Installation Instructions
1,1,1
DRYER EXHAUST TO LEFT OR
BOTTOM OF CABINET
WARNING- PROTECT YOUR HANDS
AND ARMS FROM SHARP EDGES
WHEN WORKING INSIDE CABINET.
REMOVE
SCREW
ANDSAVE.
_ REMOVE
DESIRED
KNOCKOUT
(ONEONLY).
Detach and remove the bottom or left side knockout as
desired. Remove the screw inside the dryer exhaust duct
and save. Pull the duct out of tile dryer. Protect sharp edges
around the knockout and exhaust opening with tape.
B
FIXINGHOLE
\
R
Cut the duct as shown and keep portion A.
TAB LOCATION
BEND
TAB450
m'ough the rear opening, Iocate the tab in the iniddle of
tile appliance base. I,ift the tat? to about 1,5° using a fiat
blade screwdriver.
7
ADDING NEW DUCT
FIXING
HOLE
PORTION"A" i ..........."
\
LEFTSIDE
EXHAUST
Reconnect the cut portion (A) of the duct to the blower
1-musing. Make sure that the fi:dng hole is aligned with the
tab in the base. Use the screw saved previously to secure the
duct in place through the tab on the appliance base.
ADDING ELBOW AND DUCT FOR
EXHAUST TO SIDE OF CABINET
• Pre-assemble 4" elbow with 4" duct. Wrap duct tape
around joint.
• Insert duct assembly, elbow first, through the side opening
and connect the elbow to the dryer internal duct.
CAUTION: Be sure not to pull or damage the
electrical wires inside the dryer
when inserting the duct.
>4_ DUCT
TAPE
j ,
• Apply duct tape as shown on the joint between the dryer
internal duct and the elbow.
DUCT
CAUTION:
Internal duct joints must be
....secured with tape, otherwise
they may separate and cause
a safety hazard.
Loading ...