Loading ...
Loading ...
Loading ...
Installation Instructions
[] INSTALL SIDE PANELS
SKIP THIS STEP WHEN NOT USING SIDE PANELS
If you are using 1/4" side panels, they should be
inserted into the case trim. Fasten the panels to
the refrigerator with the 3M Dual Lock adhesive
strips before setting refrigerator in place.
[] INSTALL ANTI-TIP BRACKETS
ANTI-TIP
WARNING: PRECAUTIONS
The refrigerator is Top-Heavy and must be secured
to prevent the possibility of tipping forward.
• Cut a 2" x 4" wood block 36" long,
and secure the block to -I', i ,,
the mounting 136"_
brackets __
provided, - _
using #12 or / _<___ ,,,,Positioned
_-1 A ,M_r-,H _rr_w.£. ,,, ,_-- ......... !_--_ Anti-Tip
................ WoodScrews it II I Bracket
• Secure the Mountedinto 1,1_, i
brackets with Vertical _! ""_. Wall Stud
wood block to the Wood Studs & ! i \ (Behind
back wall so that it is Drywall)
82" (or the rear installation height) from the
finished floor. Use #12 or #14 wood screws.
• Screws must penetrate at least 1" into vertical
wall studs.
ALTERNATE ANTI-TIP
PRECAUTIONS
SKIP THIS STEP WHEN USING ANTI-TIP
BRACKETS
All Profile built-in refrigerators are Top-Heavy.
They must be secured to prevent the possibility
of tipping forward. Use this alternative method
to secure the refrigerator whenever steel wall
studs are encountered.
TopCaseTrim
,/
i i i
i i i
! ! !
SideView
Install(4)1-1/2"DrywallScrews
ThroughTrimandInt0Soffit
or3/4" Min,WoodBrace
• Adjust height of refrigerator to match
installation cutout opening 83-1/2" to
84-1/2". The refrigerator must be level and
plumb with cabinets. The top case trim at
the front is 2-1/8" higher than the rear and
will overlap upper cabinets or cabinet trim.
• Open grille panel to access the top case trim.
• Use a 3/16" bit to drill 4 evenly spaced
clearance holes through the metal top
case trim.
• Use a 1/16" bit to drill pilot holes through
the metal clearance holes and into wood
soffit. The holes should be centered in the
soffit or a 3/4" minimum wood brace. The
brace spanning the enclosure must be
securely fastened to cabinets on both sides.
• Install four 1-1/2" drywall screws into the
pilot holes.
3O
Loading ...
Loading ...
Loading ...