Loading ...
Loading ...
Loading ...
9. INSTALLING THE PUMP
9.7 SWITCHING ON THE PUMP
On switching on your socket, the pump will begin to operate (if water level high enough to operate
the float switch). The pump will begin to expel the water via your hoseand once the water level
drops to the required level, the float switch will automatically switch off the pump.
*Note. Stock No.98911 is not supplied with a float switch.
9.6 CONNECTING TO POWER VIA RCD –
FIG.12
Once you have the pump safely situated and the float
switch adjusted, if required, you are ready to turn on
the pump.
Plug your pump into a Residual Current Device
(RCD) such as Draper Stock No.69307 or 89301
and connect to your mains supply.
FIG.12
RCD’s sold separately
- 17 -
Loading ...
Loading ...
Loading ...