Loading ...
Loading ...
Loading ...
9.5 PLACEMENT - FIGS. 9 - 11
The pump must be fully submersed before
the power is switched on. DO NOT turn on
when dry.
When submersing or lifting the pump it will be
necessary to use a rope or chain, this must be
attached to the transport handle.
If pumping water from a sandy or muddy floor
bed, the pump can be suspended using a rope
or chain (not supplied) fixed to the handle. DO
NOT use any of the electrical cables for this
purpose.
When pumping flood water from a room or cellar,
installation of the pump should be in a drain well
(if possible).
9. INSTALLING THE PUMP
FIG.9
FIG.10
FIG.11
- 16 -
Loading ...
Loading ...
Loading ...