Loading ...
Loading ...
Loading ...
Programmable functions
70
Keypad tone
The buzzer that sounds when a sensor
control is pressed can be switched off.
Options
= Off
= Factory default setting
PIN code
The PIN code prevents your tumble
dryer being used without your know-
ledge.
When the PIN code has been activated,
you have to enter the PIN code after
switching the tumble dryer on. Other-
wise it cannot be operated.
Options
= Off (factory default setting)
= On
If the option has been selected, after
switching on you will have to enter the
PIN code before you can operate the
tumble dryer.
Using the tumble dryer when the PIN
code is activated
After the tumble dryer is switched on,
will flash in the time display.
The PIN code is; it cannot be
altered.
Touch the sensor control until a
flashes in the first position.
Confirm with the Start/Stop sensor
control.
Enter the two other numbers in the
same way.
The tumble dryer is ready for use
after has been entered and con-
firmed.
Conductivity
This programmable function must only
be set if the residual moisture reading
in your laundry is incorrect due to ex-
tremely soft water.
Options
= Off (factory default setting)
= Low
Condition
This programmable function should only
be set if the water used for washing the
laundry is extremely soft with a con-
ductivity reading (electrical conductivity)
of less than 150μS/cm. Contact your
local water authority for the conductivity
level of your mains water supply.
Make sure that you only activate
for the condition described above.
Otherwise, drying results can be un-
satisfactory.
Loading ...
Loading ...
Loading ...