Loading ...
Loading ...
Loading ...
Problem solving guide
52
The drying cycle duration is very long
Problem Cause and remedy
The drying process
goes on too long or
even switches off.*
The room where the tumble dryer is located is too
warm.
Ventilate the room thoroughly.
Detergent residues, hair and fine fluff can clog the fil-
ters.
Clean the fluff filters and the plinth filter (see
“Cleaning and care”, sections “Cleaning the fluff
filters” and “Cleaning the plinth filter”).
Remove any visible fluff from the heat exchanger
(see “Cleaning and care”, “Cleaning the plinth fil-
ter”).
The laundry is unevenly distributed or has rolled up.
The drum is too full.
Disentangle the laundry and remove a few items.
Start a programme.
The bottom right grille is blocked.
Move any objects, such as a laundry basket, away
from the dryer.
The fluff filters and the plinth filter were wet when re-
placed.
The fluff filters and the plinth filter must be dry.
The laundry is too damp.
Spin using a higher spin speed in the washing ma-
chine.
Metallic components, e.g. zips, have prevented the
tumble dryer from registering the correct laundry
moisture level.
Open any zips next time.
If the problem recurs, dry these items using the
Warm air timed drying programme.
* Switch the tumble dryer off; wait a short while before starting a new programme.
Loading ...
Loading ...
Loading ...