Loading ...
Loading ...
Loading ...
Cleaning and care
43
Cleaning the plinth filter
Clean the plinth filter thoroughly un-
der running water.
Squeeze the plinth filter very carefully
several times as you rinse it.
Rinse the plinth filter until all visible
residues have been removed.
This can cause a fault.
The plinth filter must not be replaced
dripping wet.
Damage caused by an insuffi-
ciently cleaned or damaged plinth fil-
ter.
If the plinth filter has not been prop-
erly cleaned or is damaged, the heat
exchanger will be clogged. There will
be an insufficient flow of air and heat
in the heat exchanger. This will re-
quire a visit from the Service depart-
ment.
Before and after cleaning, check the
plinth filter in accordance with the
description in “Replacing the plinth
filter”. The plinth filter must be per-
fectly functional and undamaged
after cleaning.
Use a damp cloth to remove any fluff
from the handle.
Replacing the plinth filter
Filter wear caused by continuous
tumble dryer use.
If the tumble dryer is in continuous
use and is being cleaned regularly,
the plinth filter can begin to show
signs of wear after a while. This can
clog up the heat exchanger.
Replace the filter immediately if you
see the following signs of wear be-
fore or after cleaning (optional ac-
cessory).
Loading ...
Loading ...
Loading ...