Loading ...
Loading ...
Loading ...
STEP 15 - ASSEMBLE PIVOT ROD
, Slide the hopper bag pivot rod through the upper hole
in the upper hopper tubes and through the stitched
sleeve at the front edge of the mesh wind screen,
assembling a bag arm tube on each side as shown in
figure 15,
UPPER HOLE
STEP 16 -ATTACH ROPE
, Secure the rope to the center of the upper rear hopper
tube as shown in figure 17,
HOPPER BAG
PIVOT ROD FIGURE 17
FIGURE 15
Assemble a vinyl cap (P) onto each bag arm tube as
shown in figure 17,
Assemble two palnuts (F) by lightly tapping them onto
the ends of the pivot rod with a hammer, See figure
16,
HINT: To ease assembly of the palnuts, place the bag
on its side on a solid surface, With the bottom end of
the pivot rod against the surface, tap a palnut onto the
top end of the rod, Repeat for other end of rod,
CAP (P}
PALNUT (F}
STEP 17 - ATTACH HOPPER BAG
To attach the hopper bag to the sweeper, slide the
ends of the bag arm tubes into the ends of the hitch
tubes and secure with two clevis pins (O) and hairpin
cotters (L), See figure 18,
\
FIGURE 18
/
FIGURE 16
Loading ...
Loading ...
Loading ...