Loading ...
Loading ...
Loading ...
ASSEMBLY OF HOPPER BAG
STEP 10- ASSEMBLE UPPER TUBES
, Fit the ends of the two upper hopper tubes into the
ends of a rear hopper tube. Align the holes in the ends
of the tubes and insert plastic plugs (Q). See figure 7.
NOTE: Either side of the tubes can face up.
REAR
HOPPER
TUBE
FIGURE 7
STEP 12 - ASSEMBLE TUBES TO BAG
, Unfold the hopper bag, reverse the fold of the mesh
wind screen and then lay the bag out flat with the wind
screen on top and the Craftsman logo facing down.
, insert the ends of the assembled upper hopper tubes
down through the stitched sleeves in the sides of the
hopper bag and then slide the tubes back underneath
the wind screen. See figure 9.
STITCHED SLEEVE
UPPER
HOPPER
TUBE
FIGURE 9
STEP 11 - ASSEMBLE LOWER TUBES
, Fit the ends of the two tower hopper tubes into the
ends of a rear hopper tube. Align the holes in the ends
of the tubes and insert ptastic ptugs (Q). See figure 8.
NOTE: Either side of the rear hopper tube can face up.
LOWER
TUBE
FIGURE 8
Place the assembled !ower hopper tubes into the
bottom of the hopper bag and then slide the tubes to
the back of the bag. See figure 10.
Attach the ends of the lower hopper tubes to the
inside of the upper hopper tubes using two clevis pins
(M) inserted from the inside, and two hair cotter pins
(L). See figure 10.
HAmRCOTTER
PUN(L)
LOWER HOPPER TUBE j
FIGURE 10
HOPPER BAG
BOTTOM
Loading ...
Loading ...
Loading ...