Loading ...
Loading ...
Loading ...
STEP 7 - TIGHTEN BOLTS
, At this time tighten the four bolts in figure 1 that
fasten the hitch tubes to the sweeper housing. Next,
tighten the two bolts in figure 2 that fasten the ends
of the hitch tubes together. Finally, tighten the two
bolts in figure 3 or 4 that fasten the hitch brackets to
the hitch tubes.
STEP 9 - ATTACH KNOB
, Place the tooth=!ock washer (H) between the height
adjustment handle and the height adjustment strap.
insert the carriage bolt (D) through the handle, the
tooth=!ock washer and the strap. Assemble the flat
washer (G) and the plastic knob (S) onto the end of
the bolt and tighten. See figure 6.
STEP 8 - ATTACH HANDLE
, Assemble the height adjustment handle to the height
adjustment tube on the front of the sweeper housing.
Use the curved head bolts, bowed washers, lock
washers and hex nuts which come pre=assembled to
the tube. Position the height adjustment handle side to
side so that the height adjustment strap will align up
against the outside of the handle and then tighten the
nuts. See figure 5.
Assemble the grip (R) onto the end of the height
adjustment handle as shown in figure 5.
HEmGHT
ADJUSTMENT
HANDLE
CURVED
HEAD BOLT /
__ HEmGHT
MENT ADJUSTMENT
STRAP
FIGURE 5
HEIGHT
ADJUSTMENT
HANDLE BOLT (D)
KNOB (S)
FLAT WASHER (G)
FIGURE 6
Loading ...
Loading ...
Loading ...