Loading ...
Loading ...
Loading ...
Cleaning Procedures
or cleaning. This is to avoid damage and possible burns.
, To Prevent staining or discoloration, clean appliance after each use.
• tf a Part is removed, be Sure it is C0rrect!Y repPaced,
* Brand names are registered trademarks of the
respective manufacturers.
_* To order call 1-877-232-6771 USA or
1-800-688-8408 Canada.
_|
PART PROCEDURE
Sealed Gas
Burners
Burner Grates -
Porcelain on
Cast iron
Clock and
Control Pad
Area
Control Knobs
Cooktop and
Control Panel =
Porcelain Enamel
Storage Drawer
and Door
Handles -
Painted Enamel
Removable Burner Caps
, Allow burner to cool Remove burner cap and wash in soapy water with a plastic scouring pad. For
stubborn soils, clean with a soap-filled, nonabrasive pad or Cooktop Cleaning Creme*
(Part #20000001} _* and a sponge.
, Do not clean in the dishwasher or self-cleaning oven.
Sealed Gas Burners
, Clean frequently. Allow burner to cool Clean with soap and plastic scouring pad. For stubborn soils,
clean with a soap-filled, nonabrasive pad. Do not enlarge or distort hobs.
, Be careful not to get water into burner ports.
, Use care when cleaning the ignitor. If the ignitor is wet or damaged the surface burner will not lighL
, Wash with warm, soapy water and a nonabrasive, plastic, scrubbing pad. For stubborn soils,
clean with a soap-filled, nonabrasive, plastic pad or Cooktop Cleaning Creme* (Part #20000001}**
and a sponge. If soil remains, reapply Cooktop Cleaning Creme*, cover with a damp paper towel and
soak for 30 minutes. Scrub again, rinse and dry.
° Do not clean in the dishwasher or self-cleaning oven.
, To activate control lock for cleaning, see "Locking the Controls" page 8.
, Wipe with a damp cloth and dry. Do not use abrasive cleaning agents as they may scratch the finish.
, Glass cleaners may be used if sprayed on a cloth first. DO NOTapray directly on eontrelpad and
display area.
, Remove knobs in the OFFposition by pulling forward.
, Wash, rinse and dr},. Do not use abrasive cleaning agents as they may scratch the finish.
, Turn on each burner to be sure the knobs have been correctly replaced.
Porcelain enamel isglass fused on metal and maycrack or chip with misuse. It is acid resistant, not acid proof.
All spillovers, especially acidic or sugary spillovers, should be wiped up immediately with a dry cloth.
° When cool, wash with soapy water, rinse and dry.
, Never wipe off a warm or hot surface with a damp cloth. This may cause cracking or chipping.
, Never use oven cleaners, abrasive or caustic cleaning agents on exterior finish of range.
, When cool, wash with warm soapy water, rinse and dry. Never wipe a warm or hot surface with a damp
cloth as this may damage the surface and may cause a steam burn.
° Forstubborn soil, use mildly abrasive cleaning agents such as baking soda paste or Bon Ami*. Do not use
abrasive cleaners such as steel wool pads or oven cleaners. These products will scratch or permanently
damage the surface.
Note; Use a dry towel or cloth to wipe up spills, especially acidic or sugary spills. Surface may
discolor or dull if soil is not immediately removed. This is especially important for white surfaces.
17
Loading ...
Loading ...
Loading ...