Makita DBO480 User Manual

Loading ...

2 ENGLISH

SPECIFICATIONS

Model: DBO480 DBO481 DBO482

Pad size Square pad 112 mm x 102 mm

Triangular pad 112 mm x 190 mm

Rectangular pad 112 mm x 168.5 mm

Abrasive paper For square pad (Hook and loop) 114 mm x 102 mm

For square pad (Clamp) 114 mm x 140 mm

For triangular pad Rectangular paper: 114 mm x 102 mm

Triangular paper: 96 mm

For rectangular pad 112 mm x 168.5 mm, 112 mm x 66 mm

Orbits per minute High 14,000 min

-1

Low 11,000 min

-1

Overall length (with BL1860B) 171 mm

Rated voltage D.C. 18 V

Net weight 1.4 - 1.7 kg 1.4 - 1.8 kg

* Thestandardpaddi󰀨ersfromcountrytocountry.

•

Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochangewithoutnotice.

• Specicationsandbatterycartridgemaydi󰀨erfromcountrytocountry.

• Theweightmaydi󰀨erdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

•

Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionofresidence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingsshowthesymbolswhichmaybeusedfortheequip-

ment.Besurethatyouunderstandtheirmeaningbeforeuse.

Read instruction manual.

Wearsafetyglasses.

Ni-MH

Li-ion

OnlyforEUcountries

Due to the presence of hazardous components in the

equipment, waste electrical and electronic equip-

ment,accumulatorsandbatteriesmayhaveanega-

tive impact on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive on

waste electrical and electronic equipment and on

accumulators and batteries and waste accumu-

lators and batteries, as well as their adaptation to

national law, waste electrical equipment, batter-

ies and accumulators should be stored sepa-

ratelyanddeliveredtoaseparatecollectionpoint

for municipal waste, operating in accordance with

the regulations on environmental protection.

Thisisindicatedbythesymbolofthecrossed-

out wheeled bin placed on the equipment.

Intended use

The tool is intended for the sanding of large surface of

wood, plastic and metal materials as well as painted

surfaces.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-4:

Model DBO480

Sound pressure level (L

) : 75 dB(A)

Uncertainty(K):3dB(A)

Model DBO481

Sound pressure level (L

) : 75 dB(A)

Uncertainty(K):3dB(A)

Model DBO482

Sound pressure level (L

) : 75 dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:

Thedeclarednoiseemissionvalue(s)mayalso

beusedinapreliminaryassessmentofexposure.

Loading ...

Makita DBO480 Cordless Finishing Sander

User Manual - Page 2