Loading ...
Loading ...
Loading ...
SANTOS: User and maintenance manual
98163 EN 1.1 - 04 2018 10 / 19 www.santos.fr
15
16
17
18
19
Fig. C
Fig. D
20
22
21
Fig. E
3. Turn the grinding-disc adjusting button (6) as far as it will go to position "9".
4. Lift up the magnetic operating indication plate (14),
5. Unscrew and remove the 2 front (15) and 2 rear (16) screws, then remove the hopper
(2) by pulling it upwards, (fig. C)
6. Unscrew and remove the retaining
screw (17) of the shutter of the coffee
bean hopper (2), being careful not to
drop the spring and washer inside the
machine. (fig. D)
7. Unscrew and remove the 4 fixing
screws of the top plate (18).
8. Remove the top plate (19). to access
the grinding-discs.
9. Change the two grinding-discs (21)
(four screws (22)) after carefully
cleaning the bearing surfaces. (fig. E)
BE CAREFUL: The slightest small
coffee particle under the grinding-disc
may prevent the machine from
operating correctly. You are advised to
clean the grinder body with a
compressed air jet or a dry brush.
Reassembling:
TAKE CARE
Operation n° 1 below must be performed before tightening the 4 fixing
screws (18) of the top plate (19). This precaution is essential to prevent
any risk of the grinding-discs being brought too close to each other,
which could deform to grinder body.
!
Loading ...
Loading ...
Loading ...