Loading ...
Loading ...
Loading ...
Timer Function
The timer function differs from the Minute Minder function in that it will turn off a cooking zone at the end of the
time. It can be set for one or more cooking zones (each working independently). The Cooking Zone Select
touch control & Power LED display always shows the shortest timer when in operation.
1. First set up the appliance with cookware placed on cooking zones and set all power levels.
2. Activate a cooking zone pressing its Cooking Zone Select touch control & Power LED display and within
10 seconds press the Timer Touch Control & LED display (11). The LED shows the current timer value
(00 if new).
3. Set the time in the same manner as for the Minute Minder (the difference to setting the Minute Minder
function time is that the decimal point of the display (12) for the selected cooking zone is also flashing).
The timer starts as the last button is pressed. 3-10 seconds after the last button is pressed, the decimal
point on the Cooking Zone Timer Select Indicator (12) will stop flashing and stay on as long as the timer
is working. Another timer function can now be set on a different cooking zone, or power levels can be
adjusted.
4. If a change needs to be made to a timer, the above can be repeated. Changing the value to “00” will
disable the timer on the selected cooking zone (but not the power level).
5. When a timer function finishes, the appliance will start to beep indicating the cooking zone has finished.
The Cooking Zone Timer Select Indicator (12) for the cooking zone will flash and the Timer Touch Control
& LED display (11) LED will flash “00” for 2 minutes (unless a button is pressed) and then the displays will
return to normal. Any other timer functions that are running will continue (Cooking Zone Timer Select
Indicator decimal points on) until the next timer is finished. If all timer functions finish and there are no
other cooking zones active, the appliance will return to the Stand-By-Mode after the alarm finishes.
Auto Cooking Function
The Auto Cooking Function allows you to set any or all cooking zones up so that they run at a high power
level for a period of time, and then drop the power down to a lower level.
1. The appliance must be in set to Operating-Mode and the cooking zone selected.
2. Use the Power/Timer Slide touch control (05) to set the power to “9”.
3. Let go of the sensor and then press 9 again (the Cooking Zone Select touch control & Power LED display
changes to “A”). Holding down the sensor, slid the sensor back to the left to set a low power setting. After
5 seconds, the Select touch control & Power LED display will alternate between “A” and the low power
setting. At this point, the cooking zone will run for a set time at high, and then drop down to the low power
setting (at which point the Cooking Zone Select touch control & Power LED display changes to the low
power setting). See table for times on next page.
4. To disable the Auto Cooking Function, select the cooking zone and pick a new power setting.
Vertical Bridge Zones Function
The Vertical Bridge Zones Function allows you to control the front and rear cooking zones on the left hand
side from a single touch control (making it easier to cook something in a long pan, like fish, that covers both
cooking zones on the left of the appliance). When in operation the Cooking Zone Select touch control &
Power LED display (LHF) (08) controls both cooking zones, while Cooking Zone Select touch control & Power
LED display (LHR) (07) is disabled.
1. The appliance must be in set to Operating-Mode.
2. Select one of the left cooking zones and then press both Cooking Zone Select touch control & Power
LED displays (07 & 08) simultaneously. The Cooking Zone Select touch control & Power LED displays
(07) to the rear will show “n”, the Cooking Zone Select touch control & Power LED displays (08) to the
front will be selected (decimal point lit).
3. Set power settings as normal (both cooking zones will be adjusted).
4. To disable the function press both Cooking Zone Select touch control & Power LED displays (07 & 08)
simultaneously again (power settings both return to 0) or press the On/Off Power touch control to set the
appliance back to Stand-By-Mode.
This function will work with the Timer and Auto Cook Functions, but not with the Boost Function.
Note: For efficient cooking, both cooking zones must be covered by suitable cookware (small pots can be
used between the 2 cooking zones, but this function is best used with long trays or larger pots)
6
Loading ...
Loading ...
Loading ...