Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
38
Tall Oven
Open the tall oven door and remove the 2 lower screws and
washers and remove the upper screw and washer securing
the inner back to the back of the oven (Fig. 12.7).
Carefully lift away the inner back.
Reassemble in reverse order, making sure that you fully
tighten the 3 screws and washers.
5.3 To Change the Fan in the Right-hand Oven
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the rear. Remove
the screws securing the electric cover to the back sheet and
remove the cover. Disconnect the 3terminals connected to
the fan, noting their position.
Remove the oven inner back (see 5.2). Hold the fan blade and
remove the centre nut (left-hand thread), 2brass washers, fan
blade and circlip. Unscrew the fan retaining nuts and washers
(3 o each) and lift the fan away from the rear of the cooker.
Fit the new fan and reassemble in reverse order. Check the
operation of the oven.
5.4 To Remove an Oven Element Thermal Cut-out
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forwards to gain access to the cover box.
Undo the cover screws and lift clear.
The cut-out is located on the earth plate beside the oven
element connections. Disconnect the cut-out wiring. Undo
the xings that secure the cut-out to the earth plate and
remove.
Fit the replacement control and re-assemble in reverse order.
5.5 To Remove the Right-hand Oven Element
n
DISCONNECT FROM THE ELECTRICITY SUPPLY
.
Remove the oven inner back (see 5.2).
Remove the 2 screws from the top of the element and the 1
from the bottom of the element (Fig. 12.8). Carefully lift the
element out, disconnecting the terminals connected to the
element (noting their positions).
If it is not possible to disconnect the leads in this way, pull the
cooker forward to gain access to the rear, remove the screws
securing the electric cover to the back sheet, remove the
cover and disconnect the terminals from the rear.
Fit the new element and reassemble in reverse order. Check
the operation of the oven.
5.6 To Remove the Left-hand Oven Bottom and Top
Elements
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Bottom Element
Pull the cooker forward to access the cover boxes at the rear
of the unit. Remove the xings that secure the cover and lift
ArtNo.321-0007 - MF oven element 1
A
ArtNo.321-0008 - MF oven element 2
B
Element fixing screws
ArtNo.321-0005 Fan oven element
Fig. 12.7
Fig. 12.8
Fig. 12.9
Fig. 12.10
Loading ...
Loading ...
Loading ...