Loading ...
Loading ...
Loading ...
ENGLISH
Connections
A
Analog audio output connectors (L/R)
These output analog audio signals.
The PHONO EQ switch setting changes the type of out-
put signal.
Use the included audio cables (or commercially-available
ones) to connect to analog audio input connectors (LINE,
PHONO, etc.) on other equipment.
RCA audio cable
White (L)
Red (R)
White (L)
Red (R)
B
PHONO EQ (audio output setting) switch
ON
Audio signals that have been amplified by the built-in
phono equalizer amp are output from the analog audio
output connectors (L/R).
THRU
The MM cartridge signal is output directly through the
analog audio output connectors (L/R).
Use this when connecting to equipment that has PHONO
inputs.
o When shipped new from the factory, this is set to ON.
ATTENTION
When set to ON, if connected to the PHONO inputs of
an amplifier, for example, the output from speakers and
headphones will be very loud, which could damage
equipment or harm hearing.
C
DC input connector
After completing audio cable connections, connect the
included AC adapter here.
Confirm that the power plug of the AC adapter is
plugged into a power outlet.
o Do not use any AC adapter other than the one
included.
V
Be sure to connect the power cord to
an AC outlet that supplies the correct
voltage. Connection to an outlet that
supplies incorrect voltage could cause
fire or electric shock.
V
Hold the power plug when plugging it
into an outlet or unplugging it. Never
pull or yank on the power cord.
V
Unplug the power cord from the outlet
when you are not planning to use the
unit for an extended period of time.
D
STANDBY/ON button
Press the STANDBY/ON button to turn the unit on or put
it in standby.
Names and functions of parts
a
Turntable (platter)
Place records centered on the turntable (platter).
b
Counterweight
c
Stylus pressure adjustment ring
d
Anti-skating dial
e
Cue lever
Use this to raise and lower the tip of the stylus.
We recommend using the cue lever to avoid damaging
records and styluses, because it is safer and more certain
than using a finger to do so.
f
Tone arm holder
This is a rest for the tone arm. Gently push the clasp to the
right to release the tone arm before playing a record.
g
Tone arm
h
Rotation speed setting knob
Select the rotation speed (RPM) suitable for the record.
i
START/STOP turntable rotation knob
j
Headshell
V
Precautions when making connections
o Do not plug the unit in until after making all connections.
o Carefully read the manuals of the devices that you are
connecting and follow their instructions when making
connections.
B
C
A
RL
D
When PHONO EQ is ON
Connect to line input connectors of
amplifier, etc.
When PHONO EQ is THRU
Connect to phono input connectors
of amplifier, etc.
Included AC adapter
Amplifier
A
N
T
I
–
S
K
A
T
I
N
G
3
0
aa
d
e
f
i
h
g
c
j
b
5
Loading ...
Loading ...
Loading ...