Loading ...
Loading ...
Loading ...
106 - USE 914779723/A
If there is no intervention by the user, the
appliance cancels the function and the display
shows the current time again.
Blackout during a programmed function
If the power failure occurs while a programmed
cooking process is set:
• If the blackout is restored within the set start
time, the appliance remains in standby
mode updating the time until start.
• If the blackout is restored after the set start
time, the device waits for the function to start
and, if after a certain time there is no
intervention by the user, the appliance
cancels the function and the display shows
again the current time.
Settings
The product configuration can be set using this
menu.
• Touch the SETTINGS button on the
main menu (at the right in the lower area
).
Clock settings
• In the "settings menu " touch the CLOCK
SETTINGS button.
Digital clock
1. Select
Digital clock.
2. Select On.
Touch the CONFIRM button to
activate the Digital clock mode.
Time display
1. Select
Show the time.
2. Select On.
3. Touch the CONFIRM button to
activate the time display.
Clock format
1. Select
Time format.
2. Select 12h or 24h.
3. Touch the CONFIRM button to
activate the required time format.
(SmegConnect models only) A
notification also appears in the app
when you reconnect.
In the event of a temporary power cut,
all personal settings will remain stored.
Menu where you can set the time and
type of display.
Displays the current time in digital
format.
In the event of a temporary power cut,
the digital version will remain selected.
Activates/deactivates the clock display
when the oven is switched off.
The "Show the time" function is factory
set to Off.
If the "Show the time" function is set to
On, when the appliance is in standby it
displays the current time at low
brightness.
When the "Show the time" function is set
to On, the appliance consumes more
energy than in stand-by mode.
Only for SmegConnect models: if the
"Show the time" function is set to Off the
connectivity switches off automatically
when the clock goes into stand-by.
Activates/deactivates the clock display
in the 12 or 24 hour format.
The Time format function is factory set to
24h.
Loading ...
Loading ...
Loading ...