Loading ...
Loading ...
Loading ...
Door and control panel trim
The metal trim around the door and the control panel can be cleaned with a household
cleaner or soapy water, rinse well. Be careful notto use an excessive amount of water,
Glass on the oven door front
Use any suitable glass cteaner or soapy water.
Control Panel Area and Display Window
Wipe with paper towels dampened with soapy water or glasscleaner. Do notspray any
cleaning solutions directly onto the Display window or use large amounts of soap and
water, Do not scrub with S,O.S. pads or abrasive cleaners.
To remove pull forward to the "stop" position; lift up
on the front of the rack and pull out.
Before replacing bulb, disconnect power to oven at the main fuse or circuit breaker
panel. Be surethat the entire oven cavityincluding the bightbulb iscoolbefore attempting
to remove.
To replace light bulb
1. Carefully unscrew the glass light lens,
2. To obtain firm grasp on the bulb, wear protective rubber
gloves. Remove by turning bulb to the left, Do not touch a
hotoven lightbulb with adamp cloth as bulb will break. Note:
If the bulb does break and you wish to remove it, be certain
power supply is disconnected and wear protective gloves.
You may contact your authorized Jenn-Air Service Contractor
for service.
3. Repface bulbwith a 40 watt oven-ratedappliance bulb. Bulb
with brass base is recommended to prevent fusing of bulb
into socket.
4, Replace bulb cover and reconnect power to oven. Reset
clock.
J
31
Loading ...
Loading ...
Loading ...