Loading ...
Loading ...
Loading ...
16_ Operating
3. Vegetable & Fruit Drawers
To remove - Pull the drawer out to full
extension. Tilt up the front of the drawer and
pull straight out.
To relocate - Insert the drawer into the frame
rails and push back into place.
The drawers need to be removed before the
glass shelf above them can be lifted out.
Do not open the drawers while the pantry is open.
It may cause a scratch or breakage to the drawer
covers.
4. Cool Select Pantry™
To remove the pantry - Pull the pantry out to
full extension. Tilt up the front side of pantry
and pull straight out.
To relocate the pantry - Push the rails to the
back of the Refrigerator. Place the drawer onto
the rails and slide the pantry back until it is in
place.
To remove the divider - Pull the pantry
completely out to full extension and raise the
front side of the divider to unhook it from the
rear wall of the pantry, then lift the divider out.
To relocate the divider - Hook the back of
the divider over the rear wall of the pantry and
push the divider down.
USING THE DOORS
The Refrigerator doors ensure that the doors
close all the way and are securely sealed. When
the Refrigerator door is only partially open, it will
automatically close. The door will stay open when
opened more than 76 mm.
USING THE TILTING POCKET
The Tilting Pocket can be used to store up to
a 406 mm pizza if you place it as shown in the
illustration.
REMOVING THE FREEZER
ACCESSORIES
1. Tilting Pocket
To remove - Pull the brackets upward until you
hear a clicking sound and remove the pocket
To replace - Hook the ends of the pocket into
both brackets
1
and push down until it locks
into place.
2. Auto Pull out Drawer
To remove - Pull the drawer out to full
extension. Tilt up rear of drawer and lift straight
out.
To relocate - Place the drawer onto the rails
by tilting it up. Lower the drawer into place
until it is horizontal and slide the drawer in.
3. Freezer Drawer
To remove the freezer drawer - Pull the
freezer drawer out fully. Tilt up the rear of the
bin and lift it out to remove.
To relocate the freezer drawer - Place the bin
into the rail assembly.
1
1
2
DA99-03403A(0.5).indd 섹션2:16DA99-03403A(0.5).indd 섹션2:16 2012.5.25 1:27:43 PM2012.5.25 1:27:43 PM
Loading ...
Loading ...
Loading ...