Loading ...
Loading ...
Loading ...
OVENCOOK=NG
Control Panel
AB CD
..............f
-Favorites
Bake on / off
_etup
12-on,o,ii
Conv Clean
Raid More
-- Preheat
J KL
TIMER1
On/Off
Verlt Ovell
Fan Ught CANCEL
°ni° I J
M N 0
G
TtMER2
On / Off
P
H
1 2 3
ABC DEF
4 5 6
GH_ JKL MNO
7 8 9
PORS R)V WXYZ
Back 0 Enter
1 Space I
Foc_
The control panel is designed for ease in programming. The display window shows options for each function and moves from step
to step through the programming process. Control panel features vary by model. Oven display above is programmed for a bake
operation.
Rapid Preheat
Convect
Bake
Broil
TIMER 1
Display
TIMER 2
Number Pads
Favorites
More Options
Clean
Setup
Vent Fan
Oven Light
CANCEL
Quickset pads
Useto decrease preheating time.
Usefor convection baking and roasting.
Usefor baking and roasting.
Usefor broiling and top browning.
Sets timer.
Displaysoven functions, options and
window time of day.
Sets timer.
Useto enter time and temperature,
or to enter Favoritesnames.
Useto access, program or save
baking cycles.
Useto access additional features.
Useto set self-clean cycle.
Useto view or change factory
default settings.
Activates the ventilation fan on
the cooktop.
Useto turn the oven light on or off.
Cancels all operations except Timer,
Clock, Favorites,Setup and Vent Fan.
Use to select options in display
window 0/ext to display window
on both sides].
Quickset Pads
Quickset pads are located on each side of the display window
and are used to select the desired function or option in the
display window. To select the option or function, press the
Quickset pad next to the word.
If you need to back out of a function or option in the display,
press the Back pad. When your programming is complete,
press the Enter pad or wait four seconds and the function will
start automatically.
Up arrows indicate additional screens with additional options.
Pressthe Quickset pads next to the arrows to scroll through
the display.
Important: Four seconds after entering the function,
option, number or letter, the function will automatically be
entered. If more than 30 seconds elapse between steps in
programming, the function will be canceled and the
display will return to the previous display.
Clock
Setting the Clock: , .............
1. Press the Setup pad. Setup :
k On/Off i
2. Select CLOCK using the Quickset pads. ...........
3. Select TIME.
4. Enter the time using the number pads.
5. Press Enter pad.
6. Select AM or PM in 12 hour mode. (For 24 hour clock, see
page 16.)
7. To exit the Setup mode, press Setup pad.
15
Loading ...
Loading ...
Loading ...