Loading ...
Loading ...
Loading ...
urFaceCOOKING
Surface Controls
Use to turn on the surface elements. An infinite choice of
heat settings is available from Low to High. The knobs can
be set on or between any of the settings.
Setting the Controls
1. Place pan on surface element.
2. Push in and turn the knob in either direction to the desired
heat setting.
• The control panel is marked to identify which /i
element the knob controls. For example, the --_Front
graphic at right indicates right front element.
3. There is an element indicator light on the control panel.
When any surface control knob is turned on, the light will
turn on. The light will turn off when all the surface
elements are turned off.
When a control is turned on, a glow can be seen through
the smoothtop surface. The element will cycle on and off
to maintain the preset heat setting, even on High.
4. After cooking, turn knob to OFF. Remove pan.
Dual Element
The cooking surface is equipped with tw( __
dual elements located in the right front
and left rear positions. To operate, push
in on the control knob and turn to the
rightto control the small element, or
push in and turn to the leftto control the
large element.
Custom Control (:select models:)
The Custom Control Dual Element offers
two element sizes and is located in the
right front position. This element uses
an electronic sensor to constantly
monitor and adjust heat output for
precise and consistent temperature
control.
Flex-Choice tm Elements (select models:)
The Flex-ChoiceTM elements are fully
functioning elements that provide an
ultra low Melt heat setting for melting
chocolate and butter. They are located
in the left front and right rear positions.
The Melt setting is located between
3 and OFF. Heat settings outside of this
area function as a normal element, with 3
CLow)to High settings.
Important: When using the normal settings for preparing
foods, it may take a few minutes for the cooking area to cool
to the Warm heat setting.
11
Loading ...
Loading ...
Loading ...